For use with rotary night items and notepad boxes. Design and setup fee for a single (1) design to be laser etched on the laser cutter machines. Pay...
One linear foot of 20″ vinyl transfer/masking tape.
USCutter’s GreenStar Layflat Transfer Tape is easy to handle paper application tape. It tears easily, and has no stringy adhesive. Works great in...
One sheet of eighth inch (3mm) Baltic Birch plywood, approximately 20″ x 30″ (508mm x 762mm). Two options are available:
Sanded: pre-sanded with 220 grit sandpaper
Masked: ...
One sheet of quarter inch (1/4″, 6mm) Baltic Birch plywood, approximately 20″ x 30″ (508mm x 762mm). Three options are available:
Sanded: pre-sanded with 220 grit sandpaper
Masked: ...
One sheet of fifth inch (5.2mm) walnut plywood.
Walnut veneer (one side)
Plywood core
One sheet (24″ x 36″) of 4mm corrugated cardboard
Leather scraps, any thickness, any color. Price per pound.
Aluminum business card – blank surface
2×3.5x.02
Matte finish
Anodized
Full color
No silver edges
One square foot of EVA foam. Specs include:
untextured
9/64″ (3.5mm) thick
max width: 60″ (1.5 m)
safe for laser cutting
One sheet of All Quality Services laserable ruber for stamp engraving. Specs include:
29/32″ (2.3 mm) thick
safe for laser cutting
low odor
Two sizes available
full...
ColorBox pigment ink pad. Features include:
Waterbased
Formulated to stamp on absorbent papers
Slow-drying formula also makes them ideal for embossing and blending on coated or non-absorbent...
Miscellaneous material stocked by Seattle Makers. To adjust the price of this item, add it to your cart and then increase the quantity (qty) associated with this cart item.
One (1) can of spray paint
any color
any finish
Pixy CMU Cam5 by Pixycam.com is a fast vision sensor for DIY robotics and similar applications. You can
ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant. Specs are below:
Clear prints on the female header connector, more precise...
Longruenr Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module Compatible for ArduinoIDE (need soldered). Specs are below:
CH340G...
Does not include HDMI or USB cable (power supply)
Specs:
Touchscreen that shows up as a USB mouse – no special drivers needed
Touchscreen works on Mac, Windows, and Debian Linux (Raspbian...
An upgrade of the Raspberry Pi 3 Model B with a faster processor, WiFi, and updated Ethernet chip with PoE capability.
Specs:
64-bit quad core processor
1.4GHz
Built-in metal heatsink
Dual-band...
Connect two HDMI devices together and save space with this basic flat HDMI 1.4 cable.
Specs:
Molded grips for easy installation
Thickness: 2.7mm / 0.1″
Length: 1 foot / 30.5cm
Weight:...
Note: this is NOT a touchscreen
Specs:
5″ display with 800×480 resolution
microUSB port
50mA backlight current
Total current draw: 500mA
Panel-mountable
Plug-n-play
Attaches...
Perfect for connecting any development board, microcontroller, mobile phone, or other device to your computer or charger. Can be used to monitor your project or as a current meter. Quarter not included 🙂
Specs:
Standard...
Specs:
Measures 2.0″ x 0.9″ x 0.28″ (51mm x 23mm x 8mm) without headers soldered in
Weight: 9.7 grams
ESP8266 @ 80MHz with 3.3V logic/power
Stacking headers
Contains...
Included:
6 x M3 12mm brass hexagonal standoffs
12 x M3 7mm machine screws
Works great with classic Circuit Playground, Circuit Playground Express, micro:bit, Gemma M0 and Flora
Not just a simple breakout board, this microSD adapter goes the extra mile – designed for ease of use.
Onboard 5v->3v regulator provides 150mA for power-hungry...
Specs:
Brand: MUZOCT
Input:AC 100-240V/ 50-60Hz;Output:DC 5V/2500mA
Micro USB Charger Adapter
Enough power supply for Raspberry...
For use with rotary night items and notepad boxes. Design and setup fee for a single (1) design to be laser etched on the laser cutter machines. Pay...